Electronics and Communication · Communication Systems
Build an FM radio receiver
Assemble an FM receiver from a radio IC and tune in local stations.
- DifficultyIntermediate
- Estimated time1–2 weeks
- Budget₹500–₹1,000
- ClassClass 11 to college
- TeamSolo or up to 2
- You needBasic electronics
Prerequisites: None beyond your class work
Original · by TechnifyedHardware ProjectWorking ModelHardware
Overview
Assemble an FM receiver from a radio IC and tune in local stations.
Skills you will use
Safety
- Use only batteries or a low-voltage supply (12 V or less). Never connect a project to a wall socket.
- Hot surfaces and liquids can burn. Use tongs or oven gloves and let things cool before touching them.
Materials and tools
- FM receiver IC or module
- Audio amplifier IC
- Speaker
- Tuning capacitor or buttons
- Antenna wire
- Battery
Tools and software
Step-by-step roadmap
Start
You will finish with: a working radio and a table of stations against antenna length.
- 1
Prerequisites
Nothing special to know first. Then collect the 6 items in the materials list.
- 2
Learn
Read up on communication systems: FM, receiver, tuning. Your textbook chapter and one short video are enough.
- 3
Plan
Sketch the design, list every part with its price and decide how you will know it works.
- 4
Build
- Assemble the receiver stage.
- Add the audio amplifier.
- Attach an antenna and tune.
- Log the stations received and their frequencies.
- Test three antenna lengths.
- 5
Test
Run it ten times in a row. Note every failure, fix the cause and test again.
- 6
Document
Photograph each build stage, keep the circuit or drawing, and note what failed and how you fixed it. Report structure
- 7
Present
Demonstrate it working first, then explain how it works and what you would improve. Presentation structure
- 8
Publish
Share a short video, the parts list and the drawing or code so someone else can build it.
Expected outcome
A working radio and a table of stations against antenna length.
Other versions of this project
Advanced version
Explain the signal path with a block diagram and measure each stage.
Science fair mode
Text marked "You write this" is a prompt for your own work; everything else is specific to this project.
- Problem
- You write thisWrite your question as: How does [what you change] affect [what you measure]?
- Hypothesis
- You write thisWrite it as: If [I change this], then [this will happen], because [reason].
- Variables
- You write thisName the one thing you change (independent), the thing you measure (dependent) and what you keep the same (controlled).
Materials and procedure are in Materials and the Roadmap.
Observation table
You write thisDraw a table with one column for what you change, one for each repeat reading and one for the average.
- Graph
- You write thisPlot what you changed along the bottom and what you measured up the side; use a bar chart for categories and a line graph for numbers.
- Results
- You write thisState what the graph shows in one or two sentences, with numbers.
- Conclusion
- You write thisSay whether the result supports your hypothesis and why you think so.
Display board
- Title and your name
- Question
- Hypothesis
- Materials
- Procedure (with photos)
- Data table and graph
- Conclusion
- What you would do next
Questions judges ask
- What would you change if you did this again?
- What was your biggest source of error, and how did you reduce it?
- Where is this idea used in real life?
Working as a team
Solo or up to 2. Suggested roles:
Report and presentation
Report structure
- Title and aim
- The problem it solves
- How it works (principle)
- Parts list with cost
- Design: drawing, circuit or block diagram
- Build steps
- Testing and results
- Problems faced and fixes
- Limitations
- Future improvements
- References
Presentation structure
- The problem
- The idea
- How it works (one diagram)
- Parts and cost
- The build (photos)
- Live demo or video
- Test results
- What did not work
- Next version
Viva questions
Prepare your own answers to these before you present.
- What is the aim of your project, in one sentence?
- What is the principle behind it?
- Why did you choose these materials or tools?
- What result did you get, and was it what you expected?
- What went wrong and how did you fix it?
- How could this be improved or used in real life?
Resources
Source and attribution
Original
Written by Technifyed. Free to use for your own school or college project; write the report in your own words. Added 1 Oct 2026.
Similar projects
More Electronics and Communication projects
Electronics and Communication + Data
Filter noise from an audio recording
Record speech with a hum, find the hum's frequency and remove it with a digital filter.
Electronics and Communication · Analog Circuits
Build a clap switch
Switch an LED or a low-voltage lamp on and off with a clap.
Electronics and Communication · Sensors
Make a water-level indicator
Light LEDs at quarter, half and full tank and sound a buzzer when it is about to overflow.
Electronics and Communication · Digital Circuits
Design a digital clock from logic ICs
Build a clock with counters, decoders and seven-segment displays, no microcontroller.
Same tools
Physics · Electronics
Build a crystal radio receiver
Receive AM radio with no battery using a coil, a diode and a long wire aerial.
Two-subject alternatives
Robotics, IoT and Hardware + Electronics and Communication
Build a home automation system with a phone
Switch low-voltage lamps and fans from a phone and with schedules, using an ESP32.
Same difficulty and budget
Aerospace Engineering + Physics
Make a model wind tunnel and test shapes
Build a small wind tunnel from a fan and straws and compare the drag of different shapes.
Aerospace Engineering + Astronomy and Space
Simulate a satellite orbit
Integrate Newton's law of gravity to draw circular, elliptical and escape orbits.
Industrial and Manufacturing + Operations, HR and Supply Chain
Analyse and reduce waiting time at the canteen
Time each step of the canteen queue, find the bottleneck and test one improvement.
Mechanical Engineering · Machines
Design a gearbox and measure its speed ratios
Build a two-stage gear train and check the measured ratio against the tooth counts.