Materials, Energy and Other Branches + Chemistry
Make and test a simple supercapacitor
Build a capacitor from activated carbon electrodes and salt water and measure its capacitance.
- DifficultyAdvanced
- Estimated time2–4 weeks
- Budget₹500–₹1,000
- ClassClass 12 to college
- Team2–3 people
- You needLab equipment required
Prerequisites: None beyond your class work
Original · by TechnifyedExperimentResearch ProjectResearch orientedTwo subjects
Overview
Build a capacitor from activated carbon electrodes and salt water and measure its capacitance.
Skills you will use
Safety
- Wear safety glasses and gloves, work in a ventilated place, label every container and wash your hands afterwards. Do not taste or smell chemicals directly, and do not mix chemicals beyond the steps given.
- Use only batteries or a low-voltage supply (12 V or less). Never connect a project to a wall socket.
Materials and tools
- Activated charcoal powder
- Aluminium or graphite foil
- Filter paper separator
- Salt solution
- Clips
- 2 V supply
- Resistor
- Multimeter
Tools and software
Step-by-step roadmap
Start
You will finish with: a working cell with a measured capacitance and discharge curve.
- 1
Prerequisites
Nothing special to know first. Then collect the 8 items in the materials list.
- 2
Learn
Read up on nanotechnology: activated carbon, electrodes, energy storage. Your textbook chapter and one short video are enough.
- 3
Plan
Write your question, your hypothesis and the one thing you will change. Draw the table you will fill in before you start.
- 4
Build
- Coat two foils with a charcoal paste and dry them.
- Sandwich a salt-soaked paper between them.
- Charge to 1 V through a resistor.
- Record the voltage as it discharges through a known resistor.
- Calculate capacitance from the time constant.
- 5
Test
Repeat every reading at least three times and check the result against what the science predicts.
- 6
Document
Record every reading with its unit, photograph the setup and draw a graph of the result. Report structure
- 7
Present
Explain the question, the method and the graph in two minutes; keep the setup ready to demonstrate. Presentation structure
- 8
Publish
Share the report and photos with your class, a science fair or your school magazine.
Expected outcome
A working cell with a measured capacitance and discharge curve.
Other versions of this project
Advanced version
Compare electrode thicknesses and electrolytes.
Ways to do this project
Text marked "You write this" is a prompt for your own work; everything else is specific to this project.
- Problem
- You write thisWrite your question as: How does [what you change] affect [what you measure]?
- Hypothesis
- You write thisWrite it as: If [I change this], then [this will happen], because [reason].
- Variables
- You write thisName the one thing you change (independent), the thing you measure (dependent) and what you keep the same (controlled).
Materials and procedure are in Materials and the Roadmap.
Observation table
You write thisDraw a table with one column for what you change, one for each repeat reading and one for the average.
- Graph
- You write thisPlot what you changed along the bottom and what you measured up the side; use a bar chart for categories and a line graph for numbers.
- Results
- You write thisState what the graph shows in one or two sentences, with numbers.
- Conclusion
- You write thisSay whether the result supports your hypothesis and why you think so.
Display board
- Title and your name
- Question
- Hypothesis
- Materials
- Procedure (with photos)
- Data table and graph
- Conclusion
- What you would do next
Questions judges ask
- What would you change if you did this again?
- What was your biggest source of error, and how did you reduce it?
- Where is this idea used in real life?
- Research question
- You write thisOne question you can answer with data, narrow enough to finish in the time you have.
- Hypothesis
- You write thisWhat you expect to find, and why.
- Variables
- You write thisWhat you change or compare, what you measure, and what you hold constant.
- Methodology
- You write thisDescribe the method in enough detail that someone else could repeat it: sample, tools, procedure.
- Data collection
- You write thisSay what you will record, how many times, and how you will keep the records safe.
- Analysis
- You write thisChoose the table, chart or test that answers the question; report averages with their spread.
- Limitations
- You write thisList what could have affected the result: small sample, instrument limits, things you could not control.
Literature review
Find five to eight sources (your textbook, review articles, reports) and note what each says about your question. Group them by idea, not one after another, and end with what is still not known.
References
List every source you used in one style throughout (author, year, title, where it was published, link and the date you opened it).
Working as a team
2–3 people. Suggested roles:
Report and presentation
Report structure
- Title and question
- Background: the science behind it
- Hypothesis
- Materials
- Method (steps, with a diagram or photo)
- Observations (table)
- Results (graph and calculation)
- Sources of error
- Conclusion
- What you would do next
- References
Presentation structure
- The question
- Why it matters
- The idea behind it
- Setup (photo)
- Method in three steps
- Results (one clear graph)
- What the result means
- Errors and limits
- Conclusion and next step
Viva questions
Prepare your own answers to these before you present.
- What is the aim of your project, in one sentence?
- What is the principle behind it?
- Why did you choose these materials or tools?
- What result did you get, and was it what you expected?
- What went wrong and how did you fix it?
- How could this be improved or used in real life?
Source and attribution
Original
Written by Technifyed. Free to use for your own school or college project; write the report in your own words. Added 1 Oct 2026.
Similar projects
More Materials, Energy and Other Branches projects
Materials, Energy and Other Branches + Environmental Science
Build a biogas digester model
Ferment kitchen waste in a sealed bottle and measure the gas collected over a month.
Materials, Energy and Other Branches + Chemistry
Study corrosion protection for steel
Compare paint, oil, zinc coating and sacrificial protection on steel in salt water.
Materials, Energy and Other Branches + Agri-business and Food Science
Design a solar dryer for farm produce
Build a cabinet dryer and compare its drying time and quality with open sun drying.
Materials, Energy and Other Branches · Materials Testing
Test materials for strength with a home-made rig
Stretch wires and strips of different materials to breaking and compare their strength.
Same tools
Electronics and Communication · Digital Circuits
Design a digital clock from logic ICs
Build a clock with counters, decoders and seven-segment displays, no microcontroller.
Physics · Modern Physics
Measure Planck's constant with LEDs
Find the turn-on voltage of LEDs of different colours and get Planck's constant from the slope.
Environmental Science + Electrical Engineering
Build a wind turbine and find the best blade design
Build a small wind turbine on a DC motor and test how blade number, angle and length change the voltage.
Electrical Engineering · Renewable Power
Design a solar-powered phone charger
Build a charger from a small solar panel, a regulator and a power bank module, and measure its output.
Two-subject alternatives
Applied Mathematics + Civil Engineering
Model traffic flow with cellular automata
Simulate cars on a ring road and show how jams appear from nothing above a critical density.
Robotics, IoT and Hardware + Electronics and Communication
Build a home automation system with a phone
Switch low-voltage lamps and fans from a phone and with schedules, using an ESP32.
Mechanical Engineering + Mechatronics and Robotics
Automate a conveyor with sorting
Build a small conveyor that detects object colour and diverts each object to the right bin.
Health Technology + Mechatronics and Robotics
Prototype a robot that delivers items in a ward
Build a line-following cart that carries a tray between marked stations and stops for obstacles.
Same difficulty and budget
Chemical Engineering · Reaction Engineering
Optimise a reaction with a simple reactor model
Simulate batch and continuous reactors for a first-order reaction and compare conversion.
Automobile Engineering + Physics
Model a car suspension
Simulate a quarter-car model over a bump and tune the damper for comfort.
Computer Engineering + Systems and Cloud
Design a simple processor in a logic simulator
Build an 8-bit processor with an ALU, registers and a control unit, and run a small program on it.