technifyed

606 projects · 13 streams · every class

Engineering projects 22

Design, build and test projects for every engineering branch, from mini projects to final-year capstones, with low-cost versions where possible.

22 Engineering projects

Aerospace Engineering + Physics

Make a model wind tunnel and test shapes

Build a small wind tunnel from a fan and straws and compare the drag of different shapes.

Engineering DesignHousehold materialsFull guide

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Biomedical Engineering + Health Technology

Build a heart-rate monitor with a light sensor

Detect your pulse from light passing through a fingertip and display beats per minute.

Hardware ProjectArduino requiredFull guide

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Mechatronics and Robotics + Robotics, IoT and Hardware

Build a robotic arm with servo motors

Build a four-axis arm controlled by knobs, then record and replay a pick-and-place routine.

Robotics ProjectArduino requiredFull guide

  • Intermediate
  • 2–4 weeks
  • 1,000–2,500

Civil Engineering · Structural Analysis

Compare the strength of beam cross-sections

Fold the same sheet of card into flat, tube, box and I shapes and measure how much each bends.

ExperimentHousehold materialsFull guide

  • Intermediate
  • 2–7 days
  • Under 250

Biomedical Engineering + Health Technology

Design a walking aid with obstacle alerts

Add distance sensing and vibration feedback to a cane, designed with advice from a visually impaired user.

Arduino ProjectArduino requiredFull guide

  • Intermediate
  • 2–4 weeks
  • 1,000–2,500

Civil Engineering + Earth Science

Design an earthquake-resistant building model

Build a simple shake table and test how bracing and base isolation protect a model tower.

Engineering DesignHousehold materialsFull guide

  • Intermediate
  • 1–2 weeks
  • 250–500

Mechatronics and Robotics + Agricultural Technology

Automate a greenhouse model

Control a fan, a pump and a light in a model greenhouse from temperature, moisture and light readings.

Arduino ProjectArduino required

  • Intermediate
  • 2–4 weeks
  • 1,000–2,500

Materials, Energy and Other Branches + Environmental Science

Build a biogas digester model

Ferment kitchen waste in a sealed bottle and measure the gas collected over a month.

Working ModelHousehold materials

  • Intermediate
  • 2–4 weeks
  • 250–500

Civil Engineering + Robotics, IoT and Hardware

Build a model of a smart street light

Make street lights that switch on at dusk and brighten only when a vehicle passes.

Arduino ProjectArduino required

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Mechanical Engineering · Machines

Design a gearbox and measure its speed ratios

Build a two-stage gear train and check the measured ratio against the tooth counts.

Working ModelHousehold materials

  • Intermediate
  • 1–2 weeks
  • 250–500

Electrical Engineering + Physics

Build a wireless power transfer demo

Light an LED with no wire connection using two coils and an oscillator.

Working ModelBasic electronics

  • Intermediate
  • 2–7 days
  • 250–500

Electrical Engineering · Renewable Power

Design a solar-powered phone charger

Build a charger from a small solar panel, a regulator and a power bank module, and measure its output.

Engineering DesignBasic electronics

  • Intermediate
  • 1–2 weeks
  • 1,000–2,500

Materials, Energy and Other Branches · Materials Testing

Test materials for strength with a home-made rig

Stretch wires and strips of different materials to breaking and compare their strength.

ExperimentHousehold materials

  • Intermediate
  • 1–2 weeks
  • 250–500

Mechanical Engineering · Fluid Systems

Build a model of a gear pump or centrifugal pump

Make a small centrifugal pump from a motor and a bottle cap and measure its flow at different heights.

Working ModelWorkshop tools

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Industrial and Manufacturing + Graphic and UI/UX Design

Design an ergonomic study desk

Measure classmates and their desks, find the mismatch and design a desk that fits.

Product DesignHousehold materials

  • Intermediate
  • 1–2 weeks
  • Under 250

Mechanical Engineering + Environmental Science

Build a solar water heater

Make a flat-plate collector from black tubing and measure how much heat it captures.

Engineering DesignHousehold materials

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Electrical Engineering + Environmental Science

Generate electricity from a bicycle

Couple a DC motor to a bicycle wheel and measure the power a person can produce.

Engineering DesignWorkshop tools

  • Intermediate
  • 1–2 weeks
  • 1,000–2,500

Aerospace Engineering + Physics

Measure the thrust of a water rocket

Build a static test stand and measure thrust against time for different water fills.

ExperimentHousehold materials

  • Intermediate
  • 1–2 weeks
  • 250–500

Electrical Engineering · Generators

Make a hand-crank emergency torch

Build a torch that stores hand-cranked energy in a capacitor and lights an LED.

Product DesignBasic electronics

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Biomedical Engineering · Biomechanics

Build a prosthetic hand model

Make a string-tendon hand from card and straws that grips objects.

Working ModelHousehold materials

  • Intermediate
  • 1–2 weeks
  • 250–500

Materials, Energy and Other Branches + Agri-business and Food Science

Design a solar dryer for farm produce

Build a cabinet dryer and compare its drying time and quality with open sun drying.

Engineering DesignHousehold materials

  • Intermediate
  • 2–4 weeks
  • 500–1,000

Filters

Clear all

Enter your email and the official page opens. Phone is optional.