technifyed

606 projects · 13 streams · every class

Engineering projects 46

Design, build and test projects for every engineering branch, from mini projects to final-year capstones, with low-cost versions where possible.

46 Engineering projects

Aerospace Engineering + Physics

Make a model wind tunnel and test shapes

Build a small wind tunnel from a fan and straws and compare the drag of different shapes.

Engineering DesignHousehold materialsFull guide

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Biomedical Engineering + Health Technology

Build a heart-rate monitor with a light sensor

Detect your pulse from light passing through a fingertip and display beats per minute.

Hardware ProjectArduino requiredFull guide

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Mechatronics and Robotics + Robotics, IoT and Hardware

Build a robotic arm with servo motors

Build a four-axis arm controlled by knobs, then record and replay a pick-and-place routine.

Robotics ProjectArduino requiredFull guide

  • Intermediate
  • 2–4 weeks
  • 1,000–2,500

Civil Engineering · Structural Analysis

Compare the strength of beam cross-sections

Fold the same sheet of card into flat, tube, box and I shapes and measure how much each bends.

ExperimentHousehold materialsFull guide

  • Intermediate
  • 2–7 days
  • Under 250

Biomedical Engineering + Health Technology

Design a walking aid with obstacle alerts

Add distance sensing and vibration feedback to a cane, designed with advice from a visually impaired user.

Arduino ProjectArduino requiredFull guide

  • Intermediate
  • 2–4 weeks
  • 1,000–2,500

Civil Engineering + Physics

Build and load-test a spaghetti bridge

Design a truss bridge from dry spaghetti and glue, then load it until it fails and compute its efficiency.

Engineering DesignHousehold materialsFull guide

  • Easy
  • 2–7 days
  • Under 250

Civil Engineering + Earth Science

Design an earthquake-resistant building model

Build a simple shake table and test how bracing and base isolation protect a model tower.

Engineering DesignHousehold materialsFull guide

  • Intermediate
  • 1–2 weeks
  • 250–500

Mechatronics and Robotics + Agricultural Technology

Automate a greenhouse model

Control a fan, a pump and a light in a model greenhouse from temperature, moisture and light readings.

Arduino ProjectArduino required

  • Intermediate
  • 2–4 weeks
  • 1,000–2,500

Materials, Energy and Other Branches + Environmental Science

Build a biogas digester model

Ferment kitchen waste in a sealed bottle and measure the gas collected over a month.

Working ModelHousehold materials

  • Intermediate
  • 2–4 weeks
  • 250–500

Aerospace Engineering + Astronomy and Space

Simulate a satellite orbit

Integrate Newton's law of gravity to draw circular, elliptical and escape orbits.

SimulationComputer only

  • Intermediate
  • 1–2 weeks
  • Free

Industrial and Manufacturing + Operations, HR and Supply Chain

Analyse and reduce waiting time at the canteen

Time each step of the canteen queue, find the bottleneck and test one improvement.

Field StudyNo equipment

  • Intermediate
  • 1–2 weeks
  • Free

Biomedical Engineering + Health Technology

Make a low-cost digital stethoscope

Fit a microphone to a stethoscope head, record heart sounds and analyse them on a computer.

Hardware ProjectBasic electronics

  • Advanced
  • 2–4 weeks
  • 1,000–2,500

Civil Engineering + Robotics, IoT and Hardware

Build a model of a smart street light

Make street lights that switch on at dusk and brighten only when a vehicle passes.

Arduino ProjectArduino required

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Automobile Engineering · Safety Systems

Build an anti-lock braking demonstration

Show how pulsing a brake keeps a model wheel from locking.

Arduino ProjectArduino required

  • Advanced
  • 2–4 weeks
  • 1,000–2,500

Civil Engineering · Materials

Test concrete mixes for strength

Cast cubes with different water-cement ratios and compare their strength after curing.

ExperimentLab equipment required

  • Advanced
  • 2–4 weeks
  • 500–1,000

Mechanical Engineering · Machines

Design a gearbox and measure its speed ratios

Build a two-stage gear train and check the measured ratio against the tooth counts.

Working ModelHousehold materials

  • Intermediate
  • 1–2 weeks
  • 250–500

Electrical Engineering + Physics

Build a wireless power transfer demo

Light an LED with no wire connection using two coils and an oscillator.

Working ModelBasic electronics

  • Intermediate
  • 2–7 days
  • 250–500

Automobile Engineering + Physics

Model a car suspension

Simulate a quarter-car model over a bump and tune the damper for comfort.

SimulationComputer only

  • Advanced
  • 2–4 weeks
  • Free

Electronics and Communication + Data

Filter noise from an audio recording

Record speech with a hum, find the hum's frequency and remove it with a digital filter.

Software ProjectComputer only

  • Intermediate
  • 1–2 weeks
  • Free

Electrical Engineering · Renewable Power

Design a solar-powered phone charger

Build a charger from a small solar panel, a regulator and a power bank module, and measure its output.

Engineering DesignBasic electronics

  • Intermediate
  • 1–2 weeks
  • 1,000–2,500

Industrial and Manufacturing · Quality

Apply 5S to a workshop or lab

Reorganise a lab or workshop using the 5S method and measure the time saved finding tools.

Case StudyNo equipment

  • Easy
  • 1–2 weeks
  • Under 250

Environmental Engineering + Environmental Science

Design a low-cost water purifier for a household

Build a multi-stage filter and test turbidity and chlorine before and after.

Engineering DesignHousehold materials

  • Intermediate
  • 2–4 weeks
  • 500–1,000

Industrial and Manufacturing · 3D Printing

Optimise a 3D print for strength and time

Print test bars with different infill and layer settings and find the best strength per minute.

ExperimentWorkshop tools

  • Intermediate
  • 1–2 weeks
  • 500–1,000

Filters

Clear all

Enter your email and the official page opens. Phone is optional.