Aerospace Engineering + Physics
Make a model wind tunnel and test shapes
Build a small wind tunnel from a fan and straws and compare the drag of different shapes.
- Intermediate
- 1–2 weeks
- 500–1,000
606 projects · 13 streams · every class
Engineering projects 59
Design, build and test projects for every engineering branch, from mini projects to final-year capstones, with low-cost versions where possible.
59 Engineering projects
Biomedical Engineering + Health Technology
Build a heart-rate monitor with a light sensor
Detect your pulse from light passing through a fingertip and display beats per minute.
- Intermediate
- 1–2 weeks
- 500–1,000
Mechanical Engineering · Fluid Systems
Design a hydraulic arm from syringes
Build a three-joint arm moved by water-filled syringes that picks up and places an object.
- Easy
- 1–2 weeks
- 250–500
Mechatronics and Robotics + Robotics, IoT and Hardware
Build a robotic arm with servo motors
Build a four-axis arm controlled by knobs, then record and replay a pick-and-place routine.
- Intermediate
- 2–4 weeks
- 1,000–2,500
Civil Engineering · Structural Analysis
Compare the strength of beam cross-sections
Fold the same sheet of card into flat, tube, box and I shapes and measure how much each bends.
- Intermediate
- 2–7 days
- Under 250
Biomedical Engineering + Health Technology
Design a walking aid with obstacle alerts
Add distance sensing and vibration feedback to a cane, designed with advice from a visually impaired user.
- Intermediate
- 2–4 weeks
- 1,000–2,500
Civil Engineering + Physics
Build and load-test a spaghetti bridge
Design a truss bridge from dry spaghetti and glue, then load it until it fails and compute its efficiency.
- Easy
- 2–7 days
- Under 250
Civil Engineering + Earth Science
Design an earthquake-resistant building model
Build a simple shake table and test how bracing and base isolation protect a model tower.
- Intermediate
- 1–2 weeks
- 250–500
Electrical Engineering + Physics
Build a simple electric motor and measure its speed
Wind a coil motor with a paper-clip cradle and test how turns and magnets change its speed.
- Easy
- 1 day
- Under 250
Electronics and Communication · Analog Circuits
Build a clap switch
Switch an LED or a low-voltage lamp on and off with a clap.
- Easy
- 2–7 days
- 250–500
Electrical Engineering + Robotics, IoT and Hardware
Build a PID temperature controller
Hold a small heater at a set temperature and tune the controller from its step response.
- Advanced
- 2–4 weeks
- 1,000–2,500
Mechanical Engineering + Physics
Build a mousetrap car and maximise its distance
Power a car with one mousetrap spring and tune the lever and wheels for distance.
- Easy
- 2–7 days
- 250–500
Aerospace Engineering · Flight Mechanics
Design and fly a balsa glider
Build a glider and tune wing position and nose weight for the longest straight glide.
- Easy
- 2–7 days
- 250–500
Mechatronics and Robotics + Agricultural Technology
Automate a greenhouse model
Control a fan, a pump and a light in a model greenhouse from temperature, moisture and light readings.
- Intermediate
- 2–4 weeks
- 1,000–2,500
Materials, Energy and Other Branches + Environmental Science
Build a biogas digester model
Ferment kitchen waste in a sealed bottle and measure the gas collected over a month.
- Intermediate
- 2–4 weeks
- 250–500
Mechanical Engineering · Machines
Reduce friction in a simple machine
Measure the force to pull a load with sliding, rollers, wheels and lubricant, and compute efficiency.
- Easy
- 1 day
- Under 250
Automobile Engineering + Finance and Banking
Compare electric and petrol vehicle running costs
Build a five-year cost and emissions comparison for an electric and a petrol two-wheeler.
- Easy
- 2–7 days
- Free
Aerospace Engineering + Astronomy and Space
Simulate a satellite orbit
Integrate Newton's law of gravity to draw circular, elliptical and escape orbits.
- Intermediate
- 1–2 weeks
- Free
Chemical Engineering · Reaction Engineering
Optimise a reaction with a simple reactor model
Simulate batch and continuous reactors for a first-order reaction and compare conversion.
- Advanced
- 2–4 weeks
- Free
Industrial and Manufacturing + Operations, HR and Supply Chain
Analyse and reduce waiting time at the canteen
Time each step of the canteen queue, find the bottleneck and test one improvement.
- Intermediate
- 1–2 weeks
- Free
Biomedical Engineering + Health Technology
Make a low-cost digital stethoscope
Fit a microphone to a stethoscope head, record heart sounds and analyse them on a computer.
- Advanced
- 2–4 weeks
- 1,000–2,500
Civil Engineering + Robotics, IoT and Hardware
Build a model of a smart street light
Make street lights that switch on at dusk and brighten only when a vehicle passes.
- Intermediate
- 1–2 weeks
- 500–1,000
Automobile Engineering · Safety Systems
Build an anti-lock braking demonstration
Show how pulsing a brake keeps a model wheel from locking.
- Advanced
- 2–4 weeks
- 1,000–2,500
Civil Engineering · Materials
Test concrete mixes for strength
Cast cubes with different water-cement ratios and compare their strength after curing.
- Advanced
- 2–4 weeks
- 500–1,000
0 to compare
Compare