technifyed

606 projects · 13 streams · every class

Robotics, IoT and Hardware projects 13

Arduino, Raspberry Pi, sensors and small robots: projects where code meets the physical world.

13 Robotics, IoT and Hardware projects

We couldn't find an exact match. These are the closest 13, found by leaving out the time limit, the budget and the difficulty.

Or look inProgrammingSoftware DevelopmentArtificial IntelligenceDataCybersecurityAll TechnologyTwo-subject projectsHelp me choose

Robotics, IoT and Hardware · Robotics

Make an obstacle-avoiding robot

Build a robot that drives on its own and turns away from obstacles using an ultrasonic sensor.

Robotics ProjectArduino requiredFull guide

  • Intermediate
  • 1–2 weeks
  • 1,000–2,500

Robotics, IoT and Hardware + Agricultural Technology

Make a smart plant watering system

Water a plant automatically when a sensor says the soil is dry.

Arduino ProjectArduino requiredFull guide

  • Intermediate
  • 1–2 weeks
  • 1,000–2,500

Robotics, IoT and Hardware · Arduino

Make a digital thermometer with a display

Read a temperature sensor and show the value on a small screen.

Arduino ProjectArduino requiredFull guide

  • Easy
  • 2–7 days
  • 500–1,000

Robotics, IoT and Hardware + Mechatronics and Robotics

Build a line-following robot

Build a two-wheeled robot that follows a black line using infrared sensors.

Robotics ProjectArduino requiredFull guide

  • Intermediate
  • 1–2 weeks
  • 1,000–2,500

Robotics, IoT and Hardware + Environmental Science

Monitor air quality with a low-cost sensor

Build a particulate monitor, log readings and compare them with the nearest official station.

IoT ProjectBasic electronics

  • Advanced
  • 2–4 weeks
  • 1,000–2,500

Robotics, IoT and Hardware + Earth Science

Build a weather station that logs data

Measure temperature, humidity and pressure every few minutes and chart them online.

IoT ProjectArduino required

  • Intermediate
  • 2–4 weeks
  • 1,000–2,500

Robotics, IoT and Hardware + Graphic and UI/UX Design

Design and 3D print a useful object

Design a phone stand or cable holder in free CAD software and improve it over three versions.

Product DesignComputer only

  • Easy
  • 2–7 days
  • 250–500

Robotics, IoT and Hardware + Electronics and Communication

Build a home automation system with a phone

Switch low-voltage lamps and fans from a phone and with schedules, using an ESP32.

IoT ProjectBasic electronics

  • Advanced
  • 1–3 months
  • 2,500–5,000

Robotics, IoT and Hardware · Arduino

Build a smart dustbin that opens by itself

Open a bin lid automatically when a hand comes near, using an ultrasonic sensor and a servo.

Arduino ProjectArduino required

  • Easy
  • 2–7 days
  • 500–1,000

Robotics, IoT and Hardware · IoT

Build a GPS tracker for a school bus (prototype)

Send a vehicle's position to a server and show it to parents on a map, with privacy safeguards.

IoT ProjectBasic electronics

  • Advanced
  • 1–3 months
  • 2,500–5,000

Robotics, IoT and Hardware · Embedded Systems

Build a multiplayer quiz buzzer

Make a buzzer system that shows which of four teams pressed first.

Arduino ProjectArduino required

  • Easy
  • 2–7 days
  • 500–1,000

Filters

Clear all

Enter your email and the official page opens. Phone is optional.