Aerospace Engineering + Physics
Make a model wind tunnel and test shapes
Build a small wind tunnel from a fan and straws and compare the drag of different shapes.
- Intermediate
- 1–2 weeks
- 500–1,000
606 projects · 13 streams · every class
Engineering projects 36
Design, build and test projects for every engineering branch, from mini projects to final-year capstones, with low-cost versions where possible.
36 Engineering projects
We couldn't find an exact match. These are the closest 36, found by leaving out the time limit and the class.
Or look inMechanical EngineeringCivil EngineeringElectrical EngineeringElectronics and CommunicationComputer EngineeringAll EngineeringTwo-subject projectsHelp me choose
Biomedical Engineering + Health Technology
Build a heart-rate monitor with a light sensor
Detect your pulse from light passing through a fingertip and display beats per minute.
- Intermediate
- 1–2 weeks
- 500–1,000
Mechatronics and Robotics + Robotics, IoT and Hardware
Build a robotic arm with servo motors
Build a four-axis arm controlled by knobs, then record and replay a pick-and-place routine.
- Intermediate
- 2–4 weeks
- 1,000–2,500
Civil Engineering · Structural Analysis
Compare the strength of beam cross-sections
Fold the same sheet of card into flat, tube, box and I shapes and measure how much each bends.
- Intermediate
- 2–7 days
- Under 250
Biomedical Engineering + Health Technology
Design a walking aid with obstacle alerts
Add distance sensing and vibration feedback to a cane, designed with advice from a visually impaired user.
- Intermediate
- 2–4 weeks
- 1,000–2,500
Civil Engineering + Earth Science
Design an earthquake-resistant building model
Build a simple shake table and test how bracing and base isolation protect a model tower.
- Intermediate
- 1–2 weeks
- 250–500
Mechatronics and Robotics + Agricultural Technology
Automate a greenhouse model
Control a fan, a pump and a light in a model greenhouse from temperature, moisture and light readings.
- Intermediate
- 2–4 weeks
- 1,000–2,500
Materials, Energy and Other Branches + Environmental Science
Build a biogas digester model
Ferment kitchen waste in a sealed bottle and measure the gas collected over a month.
- Intermediate
- 2–4 weeks
- 250–500
Aerospace Engineering + Astronomy and Space
Simulate a satellite orbit
Integrate Newton's law of gravity to draw circular, elliptical and escape orbits.
- Intermediate
- 1–2 weeks
- Free
Industrial and Manufacturing + Operations, HR and Supply Chain
Analyse and reduce waiting time at the canteen
Time each step of the canteen queue, find the bottleneck and test one improvement.
- Intermediate
- 1–2 weeks
- Free
Civil Engineering + Robotics, IoT and Hardware
Build a model of a smart street light
Make street lights that switch on at dusk and brighten only when a vehicle passes.
- Intermediate
- 1–2 weeks
- 500–1,000
Mechanical Engineering · Machines
Design a gearbox and measure its speed ratios
Build a two-stage gear train and check the measured ratio against the tooth counts.
- Intermediate
- 1–2 weeks
- 250–500
Electrical Engineering + Physics
Build a wireless power transfer demo
Light an LED with no wire connection using two coils and an oscillator.
- Intermediate
- 2–7 days
- 250–500
Electronics and Communication + Data
Filter noise from an audio recording
Record speech with a hum, find the hum's frequency and remove it with a digital filter.
- Intermediate
- 1–2 weeks
- Free
Electrical Engineering · Renewable Power
Design a solar-powered phone charger
Build a charger from a small solar panel, a regulator and a power bank module, and measure its output.
- Intermediate
- 1–2 weeks
- 1,000–2,500
Environmental Engineering + Environmental Science
Design a low-cost water purifier for a household
Build a multi-stage filter and test turbidity and chlorine before and after.
- Intermediate
- 2–4 weeks
- 500–1,000
Industrial and Manufacturing · 3D Printing
Optimise a 3D print for strength and time
Print test bars with different infill and layer settings and find the best strength per minute.
- Intermediate
- 1–2 weeks
- 500–1,000
Civil Engineering · Water Resources
Design a rainwater drainage plan for your campus
Map where water collects on campus after rain and design drains and recharge pits.
- Intermediate
- 2–4 weeks
- Under 250
Electrical Engineering · Power Systems
Model a power grid with series and parallel loads
Show why power is transmitted at high voltage using long thin wires and small bulbs.
- Intermediate
- 2–7 days
- 500–1,000
Materials, Energy and Other Branches · Materials Testing
Test materials for strength with a home-made rig
Stretch wires and strips of different materials to breaking and compare their strength.
- Intermediate
- 1–2 weeks
- 250–500
Mechanical Engineering · Fluid Systems
Build a model of a gear pump or centrifugal pump
Make a small centrifugal pump from a motor and a bottle cap and measure its flow at different heights.
- Intermediate
- 1–2 weeks
- 500–1,000
Chemical Engineering · Separation
Build a distillation column model
Separate coloured water from a salt solution by simple distillation and measure the recovery.
- Intermediate
- 1–2 weeks
- 250–500
Industrial and Manufacturing + Graphic and UI/UX Design
Design an ergonomic study desk
Measure classmates and their desks, find the mismatch and design a desk that fits.
- Intermediate
- 1–2 weeks
- Under 250
Electronics and Communication · Communication Systems
Build an FM radio receiver
Assemble an FM receiver from a radio IC and tune in local stations.
- Intermediate
- 1–2 weeks
- 500–1,000
0 to compare
Compare