Aerospace Engineering + Physics
Make a model wind tunnel and test shapes
Build a small wind tunnel from a fan and straws and compare the drag of different shapes.
- Intermediate
- 1–2 weeks
- 500–1,000
606 projects · 13 streams · every class
Engineering projects 36
Design, build and test projects for every engineering branch, from mini projects to final-year capstones, with low-cost versions where possible.
36 Engineering projects
Biomedical Engineering + Health Technology
Build a heart-rate monitor with a light sensor
Detect your pulse from light passing through a fingertip and display beats per minute.
- Intermediate
- 1–2 weeks
- 500–1,000
Mechatronics and Robotics + Robotics, IoT and Hardware
Build a robotic arm with servo motors
Build a four-axis arm controlled by knobs, then record and replay a pick-and-place routine.
- Intermediate
- 2–4 weeks
- 1,000–2,500
Civil Engineering · Structural Analysis
Compare the strength of beam cross-sections
Fold the same sheet of card into flat, tube, box and I shapes and measure how much each bends.
- Intermediate
- 2–7 days
- Under 250
Biomedical Engineering + Health Technology
Design a walking aid with obstacle alerts
Add distance sensing and vibration feedback to a cane, designed with advice from a visually impaired user.
- Intermediate
- 2–4 weeks
- 1,000–2,500
Civil Engineering + Earth Science
Design an earthquake-resistant building model
Build a simple shake table and test how bracing and base isolation protect a model tower.
- Intermediate
- 1–2 weeks
- 250–500
Mechatronics and Robotics + Agricultural Technology
Automate a greenhouse model
Control a fan, a pump and a light in a model greenhouse from temperature, moisture and light readings.
- Intermediate
- 2–4 weeks
- 1,000–2,500
Materials, Energy and Other Branches + Environmental Science
Build a biogas digester model
Ferment kitchen waste in a sealed bottle and measure the gas collected over a month.
- Intermediate
- 2–4 weeks
- 250–500
Aerospace Engineering + Astronomy and Space
Simulate a satellite orbit
Integrate Newton's law of gravity to draw circular, elliptical and escape orbits.
- Intermediate
- 1–2 weeks
- Free
Industrial and Manufacturing + Operations, HR and Supply Chain
Analyse and reduce waiting time at the canteen
Time each step of the canteen queue, find the bottleneck and test one improvement.
- Intermediate
- 1–2 weeks
- Free
Civil Engineering + Robotics, IoT and Hardware
Build a model of a smart street light
Make street lights that switch on at dusk and brighten only when a vehicle passes.
- Intermediate
- 1–2 weeks
- 500–1,000
Mechanical Engineering · Machines
Design a gearbox and measure its speed ratios
Build a two-stage gear train and check the measured ratio against the tooth counts.
- Intermediate
- 1–2 weeks
- 250–500
Electrical Engineering + Physics
Build a wireless power transfer demo
Light an LED with no wire connection using two coils and an oscillator.
- Intermediate
- 2–7 days
- 250–500
Electronics and Communication + Data
Filter noise from an audio recording
Record speech with a hum, find the hum's frequency and remove it with a digital filter.
- Intermediate
- 1–2 weeks
- Free
Electrical Engineering · Renewable Power
Design a solar-powered phone charger
Build a charger from a small solar panel, a regulator and a power bank module, and measure its output.
- Intermediate
- 1–2 weeks
- 1,000–2,500
Environmental Engineering + Environmental Science
Design a low-cost water purifier for a household
Build a multi-stage filter and test turbidity and chlorine before and after.
- Intermediate
- 2–4 weeks
- 500–1,000
Industrial and Manufacturing · 3D Printing
Optimise a 3D print for strength and time
Print test bars with different infill and layer settings and find the best strength per minute.
- Intermediate
- 1–2 weeks
- 500–1,000
Civil Engineering · Water Resources
Design a rainwater drainage plan for your campus
Map where water collects on campus after rain and design drains and recharge pits.
- Intermediate
- 2–4 weeks
- Under 250
Electrical Engineering · Power Systems
Model a power grid with series and parallel loads
Show why power is transmitted at high voltage using long thin wires and small bulbs.
- Intermediate
- 2–7 days
- 500–1,000
Materials, Energy and Other Branches · Materials Testing
Test materials for strength with a home-made rig
Stretch wires and strips of different materials to breaking and compare their strength.
- Intermediate
- 1–2 weeks
- 250–500
Mechanical Engineering · Fluid Systems
Build a model of a gear pump or centrifugal pump
Make a small centrifugal pump from a motor and a bottle cap and measure its flow at different heights.
- Intermediate
- 1–2 weeks
- 500–1,000
Chemical Engineering · Separation
Build a distillation column model
Separate coloured water from a salt solution by simple distillation and measure the recovery.
- Intermediate
- 1–2 weeks
- 250–500
Industrial and Manufacturing + Graphic and UI/UX Design
Design an ergonomic study desk
Measure classmates and their desks, find the mismatch and design a desk that fits.
- Intermediate
- 1–2 weeks
- Under 250
Electronics and Communication · Communication Systems
Build an FM radio receiver
Assemble an FM receiver from a radio IC and tune in local stations.
- Intermediate
- 1–2 weeks
- 500–1,000
0 to compare
Compare